DIY DTG printers without additional electronics added.
By Bic
#6037
Big thanks to Andy and all the people of this forum.

I need a machine that can print on 8.5" x 11.0" x 0.25" substrate. Is it possible to make some simple adjustments/modifications to the C88 or WF-7110 so I can print on .25" substrate and feed thru the rear and not have to use a platen. If it could use stock parts that would be best. This is my first attempt at modifying a printer and simple is best.
User avatar
By Andy
#6316
Bic wrote:
Fri Nov 17, 2017 12:38 am
Big thanks to Andy and all the people of this forum.

I need a machine that can print on 8.5" x 11.0" x 0.25" substrate. Is it possible to make some simple adjustments/modifications to the C88 or WF-7110 so I can print on .25" substrate and feed thru the rear and not have to use a platen. If it could use stock parts that would be best. This is my first attempt at modifying a printer and simple is best.
I don't know if you could do a 1/4" item but the 1430 does have the CD printing tray.