Discuss and collaborate Arduino controlled DIY DTG
By maxdtg@gmail.com
Hi! Good morning!
I have some problems with the Paper signal, I'm using that:
#define pePaperOut 165
#define pePaperIn 0
Open DTG code version

If i use the paper trigger by hand it works fine, but when i connect it to the board with the program shows the error "Jammed Paper"
Please I need some help
Thanks folks!
User avatar
By Andy
If you're just using an Arduino you might not be giving the Epson a proper voltage.

Arduino runs on 5v and Epson needs 3.3v.