Jump to content

Convert XP15000 Roll to Roll


Mr.Carter
 Share

Recommended Posts

So if anyone want to convert XP-15000 to industrial roll to roll machine same as xp600 chinese printer i have conversion kit available(currently only for USA)

what you will get

1.Controll board to emulate all the sensor

2.pump assembly for ACSAP autoclean system after each print to get very accurate prints everytime

3.touch screen controll display

4.smps 12v to power the board

 

Features of Controll board

1.auto ink reset(chipless firmware is required) printer will not show your carts runout after few print which is the bug of chipless firmware 

2.supports roll and sheets as well just need to change mode from display 

3.can do headclean when the roll is loaded inside the printer it will not eject it out

4.12v port for auto roll unwinding and sensor

5.cut media feature for roll printing 

6.load media feature to load the sheet inside

7.foward backward buttons on display to move media forward or backwards 

8.setting can be adjusted from display like cut distance , move speed etc. To align it with your setup

9.timer 12v port for white ink stirrer motor

How to install 

Installation is very easy remove the side lead of printer so you can access motherboard connectors just remove the original cables and plug cables coming out from control board

 

Price 300$

250ml Bulk in system with wims addon +150$

  • Like 1
Link to comment
Share on other sites

On 12/23/2022 at 3:01 PM, Mr.Carter said:

So if anyone want to convert XP-15000 to industrial roll to roll machine same as xp600 chinese printer i have conversion kit available(currently only for USA)

what you will get

1.Controll board to emulate all the sensor

2.pump assembly for ACSAP autoclean system after each print to get very accurate prints everytime

3.touch screen controll display

4.smps 12v to power the board

 

Features of Controll board

1.auto ink reset(chipless firmware is required) printer will not show your carts runout after few print which is the bug of chipless firmware 

2.supports roll and sheets as well just need to change mode from display 

3.can do headclean when the roll is loaded inside the printer it will not eject it out

4.12v port for auto roll unwinding and sensor

5.cut media feature for roll printing 

6.load media feature to load the sheet inside

7.foward backward buttons on display to move media forward or backwards 

8.setting can be adjusted from display like cut distance , move speed etc. To align it with your setup

9.timer 12v port for white ink stirrer motor

How to install 

Installation is very easy remove the side lead of printer so you can access motherboard connectors just remove the original cables and plug cables coming out from control board

 

Price 300$

250ml Bulk in system with wims addon +150$

loveyhj04@gmail.com

 

plz contact me!

Link to comment
Share on other sites

  • 2 weeks later...
On 12/23/2022 at 11:31 AM, Mr.Carter said:

So if anyone want to convert XP-15000 to industrial roll to roll machine same as xp600 chinese printer i have conversion kit available(currently only for USA)

what you will get

1.Controll board to emulate all the sensor

2.pump assembly for ACSAP autoclean system after each print to get very accurate prints everytime

3.touch screen controll display

4.smps 12v to power the board

 

Features of Controll board

1.auto ink reset(chipless firmware is required) printer will not show your carts runout after few print which is the bug of chipless firmware 

2.supports roll and sheets as well just need to change mode from display 

3.can do headclean when the roll is loaded inside the printer it will not eject it out

4.12v port for auto roll unwinding and sensor

5.cut media feature for roll printing 

6.load media feature to load the sheet inside

7.foward backward buttons on display to move media forward or backwards 

8.setting can be adjusted from display like cut distance , move speed etc. To align it with your setup

9.timer 12v port for white ink stirrer motor

How to install 

Installation is very easy remove the side lead of printer so you can access motherboard connectors just remove the original cables and plug cables coming out from control board

 

Price 300$

250ml Bulk in system with wims addon +150$

 

1 hour ago, overprint said:

Do I need a separate part to make it?

Please check the above msg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...