Jump to content

Scratch print after lightly curing


Recommended Posts

Hi all, ive been trying to figure this out recently. Im not sure what causing the issue. I had several successful print several days. However now whenever i print. After coming out of the printer all color looks solid without scratch. But after trying to cure the ink without powder. It starts to scratch out the colors. Anyone encountered this issue? 16601580123106651343432761845218.thumb.jpg.6fa4d51cb708b07783162a51fcd6d741.jpg

 

16601580384873950133305046809771.jpg

16601580823373586662262629045631.jpg

Link to comment
Share on other sites

8 minutes ago, anum11 said:

Maybe over heating causes this. It could be a worse quality film or ink maybe.

I was actually able to print fine with the same settings 2 days ago. Could it really be the ink?

Link to comment
Share on other sites

3 hours ago, Dtfnoob said:

any other suggestion that can help me out?

Pretty much all it can be is your film or overheating if nothing is touching the film. Rolls/sheets of film can go from good to crap, it happens all the time. 

First step I would do is make sure the white side doesn't have that look. If it does, Something is hitting it. If it doesn't, It's the film or image in my opinion. Overheating does cause some random looking issues, so it's possible but least likely. 

Edited by johnson4
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...