Jump to content

Acrorip 10.4 Issues Printouts Cut Off


Recommended Posts

I am using Acrorip version 10.4 with the Epson Ecotank Et-8550 and my prints are coming out cut off. Its only printing a portion of the image down the middle of the sheet. I'm also using 13x19 Paper. I included images of the Acrorip settings, printer and the printout sheets.  Does anyone know how to fix this?

 

20211029_164351.jpg

20211029_164355.jpg

20211029_164430.jpg

20211029_164525.jpg

20211029_164621.jpg

20211029_164627.jpg

20211029_164644.jpg

20211029_164654.jpg

20211029_164711.jpg

20211029_164727.jpg

Printer Preferences.jpg

Link to comment
Share on other sites

3 hours ago, Hangry Muscle said:

I am using Acrorip version 10.4 with the Epson Ecotank Et-8550 and my prints are coming out cut off. Its only printing a portion of the image down the middle of the sheet. I'm also using 13x19 Paper. I included images of the Acrorip settings, printer and the printout sheets.  Does anyone know how to fix this?

 

20211029_164351.jpg

20211029_164355.jpg

20211029_164430.jpg

20211029_164525.jpg

20211029_164621.jpg

20211029_164627.jpg

20211029_164644.jpg

20211029_164654.jpg

20211029_164711.jpg

20211029_164727.jpg

Printer Preferences.jpg

Did you try my previous reccomendation of test printing this same file/settings with regular paper and see if it prints correctly?

Link to comment
Share on other sites

I had this problem with Cadlink. The problem was the film. Not sure exactly what the problem was and why specific software has this issue but I taped about 4 inches of film to the beginning of the sheet and it stopped doing this. Eventually, I switched to different film and I no longer have this issue now.

Link to comment
Share on other sites

@johnson4 I did and it prints correctly for the most part on regular paper and for nozzle checks. It might be the film, I got it printing though.  As the printer begins printing and then pulls the film into the printer. I put a plain piece of white paper in front of the film sheet, then the printer pulls the sheet and paper in further and thats when I pull the white paper back out. This has been the only way to get it to print.

Here's a video of me doing the trick.

Epson Et8550 Paper Trick

Link to comment
Share on other sites

  • 5 months later...
On 4/27/2022 at 5:10 AM, SippState said:

Finally got it to print, now it prints too large. No matter what size I set within the software. Any ideas?

Print out size revision should be 30 cm to 50 cm. if it is changed it will printout wrong sizes

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...