Jump to content

White ink print question


Recommended Posts

I have been testing my DTF P600 using Andy’s ink and film. And I wanted to see if anyone had an idea to make the white prints look more white. The white parts keep looking gray. I have attached a couple of pictures to see what you think.

Side note: the prints in the tests are purposely reversed so they don’t get confused with good product. 

F854E168-14A6-48D0-8D80-21BED1B23931.jpeg

918FC540-A181-4F1B-B55A-AD3A1664B9AE.jpeg

 

Edited by krewdentials
Removed an identifying picture
Link to comment
Share on other sites

I also use a P600 from Andy. I use EK Print and these are some things I would look into. If you use something else, this may not be as helpful but I would still recommend looking into the equivalent settings in the program you use.

- Double check the colors in photoshop and ensure it is a true white and not actually grey.

- Try increasing the underbase % without it being so high that the ink runs off the film

- Try increasing the base % if it is less than 100%

- Try increasing the brightness in EK Print.

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...