Creative Promotion

Hi Elliot I read your post and join. We also have Brother GTX printers and for some months we have been doing DTF with good results but with some things still to be corrected. Unfortunately Brother does not give many indications and leaves users to experiment: we love our printers but when you buy a 35,0000 euro machine you expect a different support. We have never had problems with washing: only on 2 nylon jackets (out of a production of 20) but I think the problem is the nylon which deserves a separate discussion. In my opinion the main problem is that 6 minutes of drying is really too much and could cause the ink to lose elasticity. We dry for 2 minutes. For the problem of excess glue, we've been through it too. This is caused by various factors including humidity and static electricity. We advise you to keep the glue very well: we use a shaker that turns it every now and then and keeps it warm (very slightly). Above all, we have noticed that after printing the sheets should not be immediately processed with glue: we let them rest on the oven surface which is slightly warm and helps eliminate static electricity. After 1/2 minutes the sheets are dusted off without glue residues. The biggest problem we're having is that we haven't found the perfect film for ink brothers yet. Some seem to work well but then you may have prints with some solid color blocks and notice banding as if the color is not spreading well on the sheet. Soon