Mr.Carter

Im installing them from initial ink charge is it ok? The chip is from verified seller and got 2 set of t913 series The only difference is you are using 200ml cart and i got 80ml cart from seller maybe that was an issue about chip position maybe it was not proper connection between probes and chips pad Huhh im frustrated now

This is the lable on the printer

This is what im getting I tried everything First i install all the Chinese carts same error Then I tried all other OEM and one Chinese. In that situation if i install one Chinese on the right side all are right side cartridges are not recognizing same for left side if i install one Chinese on left side all left side cartridges are not recognizing Then I tried resetting chinese cartridge with resetter it goes green but no change in error Then i also got one extra chipset from seller so i replaced one cartridge chip but everything is same Anyone knows what to do in this situation? The chip series is T913

This damper allows you to make the gravity feed ink system so that you can keep your ink tanks above the printer and there will be no air gaps inside the pipeline

Most of xp15000 printer endup with 031006 error within a month. The error is about printhead failure. This is Due to these Chinese cartridges keep leaking slowly when you install it or when you remove it for refilling and all the ink goes inside the headcable destroy the printhead and motherboard at this point its like you destroyed the whole printer as motherboard and printhead is expensive here is the solution for that this damper on the cartridge wouldn't let the ink to flow unless the suction is generated by printhead so no leaks keep in mind you have to install it on top of the cartridge only. inline with pipe didn't work as good as this thing work i have tested it for 4 months of use no issues yet

Wow andy is alive😂 give a thanks to jhonson4 he is totally responsible to answer all the questions on the forum

Sorry not for commercial use

Check the error code using adjustment program

I know that what i mean by seperate pump is connect seperate pump with motor like this

Even if they are multiple feet wide they can also support 12inch media , but still if you want a cheaper solution you can message me personally

The Chinese roll to roll uv printer is already available in the market i will suggest you to go with that insted of playing with p600 ofcourse it is possible to convert p600 into roll to roll uv but if machine is already available in the market why to play with it?

Yess You can connect separate pump for cleaning, system automatically turn on the pump when you give the cleaning

From now free code is not available Code guide video and schematic diagram will cost you 65usd

From now free code will not be available , the code , guide video and wiring diagram will cost 65usd

Sent to all

30

Got it

I need trial version did you have that i want to test if first...

Sent to all

You can use ready-made relay modules

Yess then you dont need code 2

Email Sent.. to you and also to the other people..

Im not sure but maybe silver mean they are made of aluminum to avoid plastic damage from uv inks

Ok thankyou will try talking with them , i also want to know that the sample you have printed is it scratch proof

It means Both are not durable?