Jump to content

Mr.Carter

Members
  • Posts

    186
  • Joined

  • Last visited

  • Days Won

    17

Everything posted by Mr.Carter

  1. Those who really want to purchase the code contact me on email my id is mr.charter1400@gmail.com
  2. Those who really want to purchase they can email me , code is not available for sale board price 300$ including wiring,motors etc except uv lamp please note mr.charter1400@gmail.com
  3. Problem is with your white in circulation system, try to keep it off and then print
  4. It didn't fit very strongly you can use some super glue at the edges
  5. Just plug into that rubber boot adding a bit of superglue will make it more durable Gravity feed system means keep the ink above the cartridge level so inks stay present always till the inlet of the damper In short make a siphon flow
  6. So if anyone want to convert XP-15000 to industrial roll to roll machine same as xp600 chinese printer i have conversion kit available(currently only for USA) what you will get 1.Controll board to emulate all the sensor 2.pump assembly for ACSAP autoclean system after each print to get very accurate prints everytime 3.touch screen controll display 4.smps 12v to power the board Features of Controll board 1.auto ink reset(chipless firmware is required) printer will not show your carts runout after few print which is the bug of chipless firmware 2.supports roll and sheets as well just need to change mode from display 3.can do headclean when the roll is loaded inside the printer it will not eject it out 4.12v port for auto roll unwinding and sensor 5.cut media feature for roll printing 6.load media feature to load the sheet inside 7.foward backward buttons on display to move media forward or backwards 8.setting can be adjusted from display like cut distance , move speed etc. To align it with your setup 9.timer 12v port for white ink stirrer motor How to install Installation is very easy remove the side lead of printer so you can access motherboard connectors just remove the original cables and plug cables coming out from control board Price 300$ 250ml Bulk in system with wims addon +150$
  7. Acrorip gives best prints on medium+large dot size
  8. Happens when you have too much white ink more than required and fast curing of the film always bake the film at low temperature with more time 2-3mins
  9. After doing this you are ready to go into dtf with your cheap dtf printing guy i have printed 30Rolls still working no printhead replacement yet
  10. Why to go for hardwork this is simple solution
  11. Second thing is make your printer little bit tilted by adding 2x1inch wood block at the back side of the printer 20221203_152854.mp4 Like this. so that even if there is 1 or 2 drop of leak during cartridge installation ink will not go towards headcable area it will get drip off from front side of the carriage
  12. The code sent already if it will help you in some way then only pay me
  13. I check the cartridges i recived and compared it OEM i noticed that the pads are slightly shifted on aftermarket carts. Removed the chip installed it at correct position according to my judgment now it is showing this the error is changed
  14. I can try that but i dont have all the OEM carts available to me LLK cartridge is missing to try this i have to purchase the LLK cartridge Another thing is if i will run initial charge with OEM , the OEM ink will go inside the printer and all the ink system and that is what i want to avoid as i will be using it for dtf
  15. Did you mean OEM carts has sensor inside them and we can just bypass the sensor and it will always read full? No need to reset chips?
×
×
  • Create New...