Heaven867693
Members-
Posts
31 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Store
Downloads
Blogs
Events
Articles
Everything posted by Heaven867693
-
I use the code on the forum
-
contact me via email: phamthaingoc13579@gmail.com
-
Does it use cmykw or cmykw vanish? sorry for my english
-
When you put 10 prints in the same location, is it a stack of copies in the same location?
-
i usually make with epson l1800 for a3 size, it has no ink chip and does not discharge ink on the left side. I think this machine is very good IMG_4552.MOV
-
I come from Vietnam. this is a uv printer l1800 i made myself based on the source code in the forum, thank you IMG_4552.MOV IMG_4552.MOV IMG_4552.MOV IMG_4491.MOV IMG_4480.MOV
-
this is the uv printer i made from epson l1800
Heaven867693 replied to Heaven867693's topic in UV Flatbed Printers
awesome, i think so too, hahaha 😝 -
My printer's printing area is 30x65cm, the maximum material thickness is 10cm. mays has a vacuum table support and displays the height of the printed object with an electronic ruler IMG_3989.MOV
-
Thank you sir!
-
DIY UV printer problem on print (1430 and 1400)
Heaven867693 replied to sem30's topic in UV Flatbed Printers
You should choose a color icc that matches the size of the large and medium ink particles. this is the print i printed with uv l1800 machine on clear plastic IMG_2861.MOV -
DIY UV printer problem on print (1430 and 1400)
Heaven867693 replied to sem30's topic in UV Flatbed Printers
I got an 80% reduction in the print's stripe -
DIY UV printer problem on print (1430 and 1400)
Heaven867693 replied to sem30's topic in UV Flatbed Printers
IMG_2686.MOV IMG_2686.MOV IMG_2686.MOV -
DIY UV printer problem on print (1430 and 1400)
Heaven867693 replied to sem30's topic in UV Flatbed Printers
I think maybe it's the ink. because when i use ink bought in my country i never had that error,icc profile only decide part,because in same print,when i change icc profile picture quality will be different -
DIY UV printer problem on print (1430 and 1400)
Heaven867693 replied to sem30's topic in UV Flatbed Printers
If you use high power uv lamp, it is easy to cause heat. 45w is enough in my opinion. UV lamp to be about 2cm away from the printed object. If it is too close, it will cause the printed object to warp, if it is too high, it will not dry. i use 45w lamp and air cooled. Your case I think is caused by ink or related to icc profile -
DIY UV printer problem on print (1430 and 1400)
Heaven867693 replied to sem30's topic in UV Flatbed Printers
sorry for my english. If you use UV ink, you have to replace the ink feeder, ink guide for UV. UV lamp should choose 45w. There are many wavelengths of light, you should choose the right one for your ink, I use 395nm. otherwise the ink will not dry at the same wavelength IMG_2725.MOV -
DIY UV printer problem on print (1430 and 1400)
Heaven867693 replied to sem30's topic in UV Flatbed Printers
IMG_2686.MOV -
DIY UV printer problem on print (1430 and 1400)
Heaven867693 replied to sem30's topic in UV Flatbed Printers
IMG_2686.MOV IMG_2686.MOV this is my printout on my uv l1800 machine. i use acrorip 10.5. no stripes at all -
Thank you !
-
-
Epson L805 UV Printer with one arduino
Heaven867693 replied to tangkibot's topic in UV Flatbed Printers
Can you share this code ? -
-
Does anyone know this technology?
Heaven867693 replied to Heaven867693's topic in UV Flatbed Printers
What type of the glue sir? -
Does anyone know this technology?
Heaven867693 replied to Heaven867693's topic in UV Flatbed Printers
Thank you sir!