Jump to content

Heaven867693

Members
  • Posts

    31
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Heaven867693

  1. contact me via email: phamthaingoc13579@gmail.com
  2. Does it use cmykw or cmykw vanish? sorry for my english
  3. When you put 10 prints in the same location, is it a stack of copies in the same location?
  4. i usually make with epson l1800 for a3 size, it has no ink chip and does not discharge ink on the left side. I think this machine is very good IMG_4552.MOV
  5. I come from Vietnam. this is a uv printer l1800 i made myself based on the source code in the forum, thank you IMG_4552.MOV IMG_4552.MOV IMG_4552.MOV IMG_4491.MOV IMG_4480.MOV
  6. My printer's printing area is 30x65cm, the maximum material thickness is 10cm. mays has a vacuum table support and displays the height of the printed object with an electronic ruler IMG_3989.MOV
  7. You should choose a color icc that matches the size of the large and medium ink particles. this is the print i printed with uv l1800 machine on clear plastic IMG_2861.MOV
  8. I think maybe it's the ink. because when i use ink bought in my country i never had that error,icc profile only decide part,because in same print,when i change icc profile picture quality will be different
  9. If you use high power uv lamp, it is easy to cause heat. 45w is enough in my opinion. UV lamp to be about 2cm away from the printed object. If it is too close, it will cause the printed object to warp, if it is too high, it will not dry. i use 45w lamp and air cooled. Your case I think is caused by ink or related to icc profile
  10. sorry for my english. If you use UV ink, you have to replace the ink feeder, ink guide for UV. UV lamp should choose 45w. There are many wavelengths of light, you should choose the right one for your ink, I use 395nm. otherwise the ink will not dry at the same wavelength IMG_2725.MOV
  11. IMG_2686.MOV IMG_2686.MOV this is my printout on my uv l1800 machine. i use acrorip 10.5. no stripes at all
×
×
  • Create New...