Jump to content

Pompoko

Members
  • Content Count

    56
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Pompoko

  1. 395nm is most universal for most available inks
  2. Both ....led life and printer head .... what china guys suggested is use 12v and 1A constant current PSU it cure ink well so I think not extra power and extra heat is needed.
  3. Hmm I set one of these 12v 1A and it was more than enough to cure ink I used so go down as low you can ...Save your printhead life ...
  4. Which led module it yours one ? Do you have any aliexpress link or led module model ? As there is a lot of variations.
  5. Megainks .....Mimiaki Lus120.....Nazdar260 ....UV works without any profiling needed as they was mixed to be used with epsons dx4...dx5...dx7 printing heads
  6. so which ink do you recommend ?? I am use Megainks soft and I am so far so happy with...works without any extra colour profiling as is prepared for epson users base on orginal epson colours....
  7. Hmm my friend use led uv ink in 1500w for more than 2 years already .... never had any clogs ....and was not aware of cleaning caping station too:) so seems like it is not as bad.... of course on my L1800 I hade to replace dampera anb tubes plus caping station tubes to solven friendly and uv blocking ones..... otherwise it seems to works fine .... i have tested some uv ink under day light and it not cure... cure well when strong uv lamps is used close to it ....
  8. I mostly print on plywood and I am happy with my results not 100% happy with speed so it is why I looking in to it
  9. P600 is coming with gold ecosolvent head and caping station ......I have L1800 converted and it works so good ...I just wonder if P600 will be faster ....as it have 4 chanells for white... or 3 for white and one for varnish ....which will helps mi prints on glass...acrylic ans some metals..... as with L1800 i need to use manual primer aplications....
  10. Andy will little uv as my one installed on L1800 works fine with P600 . I have spare brand new p600 which can be converted.L1800 have cheep printing heads but it is quite slow ...i just wonder if P600 will do the job better ?
  11. Aliexpress ...hand Cutted pice of aluminium just to fit ...6mm clear tubes .... plastic water container plus fish tank water pump....
  12. Fits well L1800 and just fits without cutting anything ...more mods in the future
  13. I tested my little 60w module..today .... as suggested by few guys I moved it a bit up let say 4-5mm over printing head level to cover wider area and avoid polymerisation on the head itself ...I tested full platen printing and it works fine ....constant current led driver used ...seems like it is scratch proof ..too I was not able to scratch it easy even with sharp knife .... more testing soon module is water cooled I will use 5-10l of destiled water and fish tank pump...Today I used 45l but it is too risky to have such big capacity...heasink is almost freezing but uv under seem to be so str
  14. What about P600 as UV printer ? Is there more room for uv diodes ? What about uv cartridges ? Are they available ? Or using standard uv dampers and bottles is better way ?
  15. Wow interesting will you share stl for this 3d printed bracket ? how yours enclosure looks like as I guess Orginal one will not fit when it is moved .
  16. Hmm so looks like it is worth to try ..:without cutting first ...I also wonder if is possible to set up pernament offset in the firmware ?
  17. Hahaha good one I have encoder wheel behind It is why askign how the guys done it
  18. do you have it instlled on L1800 ? share pictures how you cutted frame please ...
  19. Epson L1800 how to install it ? Do I need to cut anything ? Askign as I think Printer head goes far right when autoleveling head ? Any pictures of installations on L1800?
  20. What power ? 395Nm? Is it cure full plate width ? Is left side of the printed Cutted ? To fit it or it fits without any modyfications ?
  21. China Guys call it “60w” what will be the best power source ?
  22. I have that one ...just wonder if it will perform better than air cooled ? How to override settings and make head goes far right to make sure it covers full platform area with uv light and cure ink .
×
×
  • Create New...