Jump to content
OpenDTG forums are becoming DTF.com forums

anum11

Members
 View Profile  See their activity

  • Posts

    658

  • Joined

  • Last visited

  • Days Won

    25

 Content Type 

Everything posted by anum11

  1. anum11
    You cannot use 1300 for dtf.
  2. anum11
    Maybe ink in some cables?
  3. anum11
    Your chip may not sit well on catridge or on chip reader.
  4. anum11
    Check if it have refillable catridges and resetter for catridges and maintaince tanks. Also i would advise you to stay away from used ones. Cap mechanism and printhead is a bit troublemaker if someone messed with it beforehand.
  5. anum11
    Shake your catridges and get 2-3 head cleanings, then print. Most likely your ink pigment is seperating.
  6. anum11
    I am using this with sublimation ink for diffirent purpose. 4900 have 11 carts, when you first open the printer always one of catridges throws error you pull it out and pull back it in. Some catridges dont sit in very well so i taped some chips to make sure they sit well. since it is sublimation i use it at 720*720 double cmyk. This gives me 1 meter each 2 minutes. I can go down to 720*360 on acro then it gives 1 meter per minute but quality drops a bit. I use refillable catridges with auto reset chips bought from china.
  7. anum11
    Yes for 4900 no headstrike whatsoever unless you run into clog or catridge issues it is a breeze to use. I can print good prints without white layer on 720*360. It prints 1 meter per minute. But since i dont trust dtf inks (all brands have quality control issues) i would not recommend this to a new learner.
  8. anum11
    Catridges are a problem. Printhead is also a lot sensitive from other epson heads, it clogs very fast on mistake and very hard to unclog. Permament clogs happens fast, this is not suited for someone who will use as his first printer. Used printer might give a lot of headaches so stay away from used printers of this model.
  9. anum11
    Dont expect customer service from china. If you ever in need of customer service buy from a capable importer and think price diffirent as support payment. Being able to buy sonething from manufacturer does not bring you support you need, that is not how most of chinese work. They sell you what you want. That is it.
  10. anum11
    Dont get your hopes too high. Dtg and dtf printing is full of pot holes. I am somehow going on but every week i gotta deal with something.
  11. anum11
    It is just cadlink. Not everything works perfectly it is still under development. I would contact them to inform and ask a fix.
  12. anum11
    This is an error releated to printer itself. Check on google what code means and get help for repair.
  13. anum11
    İmage issues from photoshop could cause not printing white. Try some images from google, if they are ok check your images.
  14. anum11
    10.3 and 10.5 both same speed.
  15. anum11
    no not tried with ek.
  16. anum11
    it is bidirection with acrorip. it prints identical to p400 which confused me. I will try it with texprint.
  17. anum11
    Could be supplies or your heat press settings.
  18. anum11
    You are most likely missing something. Take a step back and work on it later.
  19. anum11
    This machine can print good quality at 720x720. it is same head with xp-15000 with a diffirent manifold.
  20. anum11
    it goes up to 100. Vibrancy depends on printer model, icc profile, ink, pet film and ink limit. You have to try.
  21. anum11
    I did try a 4900 speed it seems same speed as p800. But with this head going under 720*720 might be possible. Just not with acrorip. Will try another software if i get good results will share it.
  22. anum11
    My numbers are based on epson printers. most likely then, carriage speed stays same with same mainboard nomatter what the printhead is capable.
  23. anum11
    Xp 600 is %30 slower than dx5 or 3200. That is the only diffirence that matters. 4 head xp600 could be better then anything if there is an option like that.
  24. anum11
    Yes, pet films are produced by small businesses. So quality would differ a lot from batch to batch. This is one of main negative of DTF. Same happens for powder too.
  25. anum11
    Could be pet film issue, did you check it with paper?
×
×
  • Create New...