Jump to content

johnsmear

Members
  • Posts

    2
  • Joined

  • Last visited

Everything posted by johnsmear

  1. Just on a side note: Our AC is not working for a few days now and the weather has changed drastically been raining for a 2 days now. Just ordered a humidifier, been reading and watching more videos about it now. Should I also look at some other stuffs aside from humidity ? What else could be causing the issue.
  2. Hi recently we have been running into an issue of dtf inks not drying on t-shirts. Specially on black prints, requiring additional 3-4 press (which in some cases helps drying up while some dont) The print can be smudge with a piece of cloth after doing a double press. While both at luke warm and cold state of the print on the tshirt. The issue started 1-2days back, We already had done some of the process below to identify the issues (unsuccessful). 1) change the inks (white and colored) completely. 2) used a different powder. 3) Tried different temperature of curing (oven 100-150 Celcius). We had no problem doing a double press for our previous tshirts and no pre heating of tshirts. We keep at least 30-60 seconds before putting in the powder. I have been reading the forum posts and keep reading about static and moisture, is that causing the issue (if so how do I solve that issue)? or is it an ink, powder or film issue (have not tried a new film)? We have a chinese 24inch dtf printer, while the film is a roll. Thankyou for any responses
×
×
  • Create New...