Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 11/25/2018 in all areas

  1. 3 points

    Version 20.0.0

    527 downloads

    This code is a full version intended for use with our V2 AIO and shield boards. Can also be used with a standard Arduino Uno. Settings are for the Epson P600 Requirements: encoder and bounce2 library in Arduino IDE 5v to 3v step down on the PE and ASF signals to protect the Epson 30 tooth pulley
  2. 1 point
  3. 1 point
  4. 1 point

    Version 1.0.0

    547 downloads

    This is a light / core version of our full OpenDTG code that is available to paid members. Fully functional but does not have the following features of the paid version: Support for physical buttons, it uses the desktop app only No automatic 2 pass No code to allow full removal of the ASF assembly Requirements: OpenDTG Desktop App needed to control platen Encoder and bounce2 libraries installed in Arduino IDE 5v to 3v step down of PE signal to protect the Epson mainboard. ASF assembly must be left intact. 30 Tooth Pulley for the belt drive
  5. 1 point

    Version 0.0.1

    60 downloads

    At one time I tried to make a laser autofocus of the laser head, I didn’t have enough experience, there were several sketches in the archive, a good starting point. https://photos.app.goo.gl/gcmp6PnhtBxBmcYo6
  6. 1 point

    Version 1.0.0

    110 downloads

    SureColor-P600-exploded-diag
  7. 1 point
  8. 0 points

    Version 1.0.0

    355 downloads

    This .dxf CAD file has all of the plates used in building the OpenDTG basic base kit and platen. Requires metal bending to use as is. The center rail for this design is the 1000mm C-Beam from OpenBuildspartstore.com We use aluminum but plastic or wood may work.
×
×
  • Create New...